Golf Stance Width: 3 Setup Rules Every Golfer Should Know

You’ve heard the basics: stand shoulder-width apart, knees flexed, stay balanced. What if your swing still feels off? Golf stance width affects your rotation, balance, and contact more than most golfers realize. Sometimes, the difference between flushing it and chunking it is just a couple of inches. Here are three setup rules to help you find the right stance width for your swing.

Your stance width needs to fit you

Wouldn’t it be great if there were an exact measurement for how wide your golf stance should be? There isn’t. Since there is no one-size-fits-all stance width, you have to do some experimenting to come up with what you consider your stock stance.

A drill for this, seen in the video from Titleist below, is called the Thigh Kiss Drill.

The drill:

Start in a wide, athletic stance (like you’re playing defense in basketball). Place a golf club across your thighs. Make a mock turn toward the target. If your thighs can’t “kiss” during the turn, you’re too wide; narrow your stance slightly and start to establish your baseline.

Use the shoulder rule to build a repeatable setup

Take some of that feedback you learned in the drill above, and now work on setting up a guide for yourself to narrow down these positions. As a general rule, your stance width should change as follows:

Wedges: Feet just inside shoulder width Mid-irons (7i): Feet aligned with shoulders Driver: Feet just outside shoulder width

This scale adjusts naturally with club length and swing speed. If you don’t make these small adjustments, you’ll likely struggle with low point control. The low point is the bottom of your swing arc, and it will shift as your stance and club selection change.

A stance that’s too wide with short irons can make it hard to stay on top of the ball, you’ll notice fat and thin shots when it’s off.
A stance that’s too narrow with longer clubs can throw off balance as speed increases.

Set your stance, then add foot flare for better rotation

Foot flare is one of the most overlooked setup elements. Flaring your toes helps unlock rotation, balance, and pressure shift during the swing.

Lead foot: Flare about 30° outward Trail foot: Flare about 15° outward

Flare your feet after setting your stance width. The flare is an angle, not added width.

Final thoughts

There are many small details that go into a proper golf setup. Stance width is one of the most important. Sometimes, you need to isolate just one element and get it dialed in. Play around with your stance width, test it, and adjust it. Use these setup rules as a guide, and you’ll see more consistent, centered contact and fewer wasted swings.

The post Golf Stance Width: 3 Setup Rules Every Golfer Should Know appeared first on MyGolfSpy.